CamBam

Made by CamBam => Members Projects => Topic started by: 10bulls on May 25, 2007, 10:03:06 am

Title: Zongo's test piece
Post by: 10bulls on May 25, 2007, 10:03:06 am
My new machinist friend Zongo has been putting CamBam through it's paces with encouraging results and much terrific feedback.

This is a test rig he prototyped.  The base plate was generated using CamBam.
After machining, the baseplate was spun at 7400rpm and required no balancing.
Which is as much a testiment to the quality of the machinist and machine I think.

Thank you very much for the pictures and comments John.