Messages

16

Members Projects / Re: Thread Milling

« on: December 25, 2020, 00:52:43 am »

A couple of links.

I sometimes use a little tool from Vargus for tapping 1/8" GAS, very nice and fast.


https://www.vargususa.com/Vardex-Products/Thread-Milling
https://www.dormerpramet.com/en-us/productssite/pages/new-carbide-thread-milling-cutters.aspx?country=us

Merry Christmas.

Andrea

17

CamBam help (General usage) / Merry Christmas

« on: December 25, 2020, 00:32:25 am »

I wish a Merry Christmas to all forum folks!

18

Problem dxf files etc... / Re: STEP File problem

« on: September 08, 2020, 21:19:03 pm »

I opened it in Varicad, saved as AP 214 and Cambam open it correctly. 
Cambam 1.0 rc-3 linux 64 bit.

19

Related Softwares / Re: 4GB Patch

« on: August 04, 2020, 23:09:09 pm »

64 bit distro is the best solution, only if you have an old pc, not suitable for 64 bit, the 32 bit pae kernel can address more than 4 GB of memory:
https://help.ubuntu.com/community/PAE

20

Bug Reports / Re: cannot set Tool Profile at machining level

« on: July 01, 2020, 21:46:55 pm »

Hello, I confirm the bug.
I never noticed it before just because I use normally the tool table and put just the tool number in the mop.

CamBam plus [1.0] rc-3 Linux
Ubuntu 18.04
Mono JIT compiler version 6.10.0.104

21

CamBam help (General usage) / Happy New Year

« on: January 01, 2020, 22:00:05 pm »

I wish an happy 2020 to all people in this forum 

22

Installation Help / Re: linux version mono-alpha16-64bit problem with Text & libcambam64.so

« on: March 09, 2019, 00:05:00 am »

Hi Jim, I actually use ubuntu and my help about Fedora may be poor.

Reading here GLIBC_2.7 here seems to be new enough.
 
https://pkgs.org/download/libc.so.6(GLIBC_2.18)(64bit), but your system seems not recognize it.

May be installing a new version of libc.so.6 solve your problem.

Good luck,

Andrea

23

CamBam Shop Feedback / Re: I know... board rules, but...

« on: December 24, 2018, 21:52:29 pm »

Merry Christmas and Happy New Year to all of you!

24

Bug Reports / Re: I Feel Stupid

« on: September 24, 2018, 23:54:07 pm »

Your file works good also on linux cambam version 1.0.

25

Latest News / Re: CamBam plus V1.0 (Linux development release)

« on: August 23, 2018, 21:01:19 pm »

Thank you Django, I know this is not a problem regarding  cambam, Andy has already investigated on it, and he found a workaround for the next release. It have got it should be related to mono and how it use the threads. In relationship also with unity.

Some days ago, after a mono upgrade, the problem was solved. May be the mono guys fixed the problem!
But this fixing was not reliable: after some days and some other system upgrade, the problem starts again.

My post was just for sharing this informations,  not for blame something, the cause is already known.

( I'm thinking to try mum debian too, after several years with ubuntu. Is it really more complicated?)

Andrea

26

Latest News / Re: CamBam plus V1.0 (Linux development release)

« on: August 17, 2018, 23:08:55 pm »

Today another upgrade of mono (now is 5.14.0.177) and now all files open correctly. 

After the last update regarding Unity,  the problem is alive again, in the same way as before.

27

Bug Reports / Re: CamBam 1 R16 for Linux - can't open file from Windows version

« on: August 15, 2018, 23:09:43 pm »

I think there is a problem in the line 166, I tried to add another 0, and the file opens fine.
Here the file with the little corrections, it seems good to me.

28

Latest News / Re: CamBam plus V1.0 (Linux development release)

« on: August 07, 2018, 23:26:12 pm »

Today another upgrade of mono (now is 5.14.0.177) and now all files open correctly. 

29

Latest News / Re: CamBam plus V1.0 (Linux development release)

« on: July 05, 2018, 14:02:39 pm »

It hangs when I select a file, and select Open.
The dialog shows correctly, I can move between directories, select a file without problems until I click on "Open".

30

Latest News / Re: CamBam plus V1.0 (Linux development release)

« on: July 05, 2018, 13:12:58 pm »

Hello Andy, no problem to saving files.
Seem to be related only to the form for opening the file, opening either from the drop menu of recent files or opening from the file manager works good.
The icon or the item open in the menu the most of time stall cambam with "thinking" until stopped from terminal.

Starting Cambam with sudo works.

Thanks you,

Andrea