Author Topic: Thank you very much for fixing the website  (Read 34133 times)

Offline pixelmaker

  • CNC Jedi
  • *****
  • Posts: 1996
    • View Profile
    • pixelmaker
Thank you very much for fixing the website
« on: October 03, 2024, 12:30:37 pm »
Hello Andy
Thank you very much for fixing the website and the forum. It was only when the forum was no longer accessible that I realized how many users need the forum.


Offline EddyCurrent

  • CNC Jedi
  • *****
  • Posts: 5333
  • Made in England
    • View Profile
Re: Thank you very much for fixing the website
« Reply #1 on: October 03, 2024, 14:00:07 pm »
Hello Andy
Thank you very much for fixing the website and the forum. It was only when the forum was no longer accessible that I realized how many users need the forum.

+1
Filmed in Supermarionation

Offline lloydsp

  • CNC Jedi
  • *****
  • Posts: 9090
    • View Profile
Re: Thank you very much for fixing the website
« Reply #2 on: October 03, 2024, 16:02:41 pm »
Yes!  I'm sorry when it's down.
Lloyd
"Pyro for Fun and Profit for More Than Fifty Years"

Offline dh42

  • Administrator
  • CNC Jedi
  • *****
  • Posts: 7597
    • View Profile
    • Cambam V1.0 French Doc
Re: Thank you very much for fixing the website
« Reply #3 on: October 03, 2024, 16:05:42 pm »
Nice, thanks Andy !

++
David

Offline EddyCurrent

  • CNC Jedi
  • *****
  • Posts: 5333
  • Made in England
    • View Profile
Re: Thank you very much for fixing the website
« Reply #4 on: October 03, 2024, 19:41:47 pm »
Lloyd,

Nice to see you here after those storms.
Filmed in Supermarionation

Offline lloydsp

  • CNC Jedi
  • *****
  • Posts: 9090
    • View Profile
Re: Thank you very much for fixing the website
« Reply #5 on: October 03, 2024, 20:58:30 pm »
Thanks, Eddy.  We had very little damage -- only a little roofing on the barn.  But we had 16 hours without power, and over 8" of rain, so it got a little 'soggy'.  We have a generator (not big enough for the air conditioner, but will handle the other loads), but I was loathe to run it full-time, not knowing how long power would be out.  So we have a 'checklist', run the genset only 50% duty cycle, and only open fridges and freezers one hour into a 2-hour 'on' period, so they can re-chill before we shut it down.

We got through just fine.  Except for the folks in the 'Big Bend' area of Florida and southern Georgia, North Carolina actually got the brunt of it.  Whole towns were simply wiped off the planet by 15' deep flash floods.  Little Biltmore Village, just down the mountain from the famous Biltmore House, was destroyed, among many others.

We're grateful to the Lord we got by so easily!
L
"Pyro for Fun and Profit for More Than Fifty Years"

Offline newlinuxuser

  • Droid
  • **
  • Posts: 99
    • View Profile
Re: Thank you very much for fixing the website
« Reply #6 on: October 03, 2024, 21:11:18 pm »
Thank you Andy.

Offline Bubba

  • CNC Jedi
  • *****
  • Posts: 3383
    • View Profile
Re: Thank you very much for fixing the website
« Reply #7 on: October 04, 2024, 00:40:54 am »
Thank you Andy. Glad to be back here again.

Lloyd, glad that overall you survived it well. We finally got power yesterday. Survived on generator power. Home, shop survived fine, lost 6 tall pine trees, now. clean up time.
My 2¢

Win11, CB(1.0)rc 1(64 bit) Mach3, ESS, G540, 4th Axis, Endurance Laser.

Offline Dragonfly

  • CNC Jedi
  • *****
  • Posts: 2680
    • View Profile
Re: Thank you very much for fixing the website
« Reply #8 on: October 04, 2024, 10:21:21 am »
I am not going to thank.
IMHO this is irresponsible. To have a whole community built around CamBam and not to write a single line maybe for more than an year.
If Andy is so busy and so much lost interest in his own brainchild he could at least inform us. Or give David or someone else access to the hosting server to administer it.
Speaking about hosting I am afraid that one day, without notification, he will simply stop paying for it and the forum and website will be lost forever.

Ivan

Offline lloydsp

  • CNC Jedi
  • *****
  • Posts: 9090
    • View Profile
Re: Thank you very much for fixing the website
« Reply #9 on: October 04, 2024, 10:54:52 am »
Ivan, I have feelings that vary from thankfulness to how you feel -- disowned.  I wish Andy would 'turn it over' to someone who can attend to it.

000

Bubba, where are you located?  We're about 20 miles southwest of Palm Coast, FL.

Lloyd
« Last Edit: October 04, 2024, 10:57:01 am by lloydsp »
"Pyro for Fun and Profit for More Than Fifty Years"

Offline Bubba

  • CNC Jedi
  • *****
  • Posts: 3383
    • View Profile
Re: Thank you very much for fixing the website
« Reply #10 on: October 05, 2024, 01:13:40 am »
I'm about 40 miles west from Savannah, Georgia. 
My 2¢

Win11, CB(1.0)rc 1(64 bit) Mach3, ESS, G540, 4th Axis, Endurance Laser.