I used some new (to me) CB features today and found them to work excellently!
The first feature was using the profile MOP to mill a pocket in my vise softjaws, the reason being to use the corner overcut option to get a tight fit on some angular corners. I had to increase the cutwidth to fill the pocket.
Then when I tried to clamp the part in the pocket, it didn't fit (too tight). But then rerunning the profile with a negative roughing allowance of .005" to widen it slightly overall allowed a nice tight fit.
Finally running the same profile with a more negative roughing allowance allowed me to machine the part to size and no burrs along the edge.
Seems every time I use CB I find some new nifty feature. Thanks!
