Author Topic: FORUM UNDER MAINTENANCE currently READ ONLY  (Read 8378 times)

Offline 10bulls

  • Administrator
  • CNC Jedi
  • *****
  • Posts: 2164
  • Coding Jedi
    • View Profile
    • www.cambam.info
FORUM UNDER MAINTENANCE currently READ ONLY
« on: April 25, 2018, 11:30:22 am »
We are very sorry for the forum being out of action.

We are currently working to get the forum up and running again as fast as we can.

In the mean time we have put up an older snapshot for reference and have made this read only.

Thank you for your patience while we continue work on this.

Regards

CamBam Team

Offline 10bulls

  • Administrator
  • CNC Jedi
  • *****
  • Posts: 2164
  • Coding Jedi
    • View Profile
    • www.cambam.info
Re: FORUM UNDER MAINTENANCE - Nearly there!
« Reply #1 on: April 25, 2018, 14:10:46 pm »
Nearly ready!!

We are very sorry again for the forum being out of action for so long.

The main cambam.co.uk server, a venerable workhorse that has been serving the forum and other functions for over 10 years :o, died after a series of unfortunate power failure events and it has been a challenge to get everything back on track.

But I think we are just about there and I will put the forum back in write mode soon.

Email notifications should be working, but you may encounter 'fraud detection' messages from your mail clients until we get the DNS record changes in place to prevent this.

If there is anything missing, or not working please let us know.

Thank you all for your patience, and as always, thank you very much for making this forum such a great place for over a decade and for decades to come  ;D!

Regards

Andy [10bulls]





Offline dh42

  • Administrator
  • CNC Jedi
  • *****
  • Posts: 6133
    • View Profile
    • Cambam V1.0 French Doc
Re: FORUM UNDER MAINTENANCE currently READ ONLY
« Reply #2 on: April 25, 2018, 16:40:06 pm »
Hello Andy

Thank !  ;D

It seems that the capacitors of the MB power supply, just under the CPU, have had hot !
It was the most current defect I found on "old" motherboards when I was PC Reseller ...

++
David

Offline lloydsp

  • CNC Jedi
  • *****
  • Posts: 8331
    • View Profile
Re: FORUM UNDER MAINTENANCE currently READ ONLY
« Reply #3 on: April 25, 2018, 17:49:28 pm »
Welcome back, Andy!

Please -- I'm treating this as if it were a harbinger of things that 'might happen'; So, please spend more time with us here.

I know you're busy as heck, but we really enjoy your inputs... not only your new software mods, but your insights into how CB should work.

Lloyd
"Pyro for Fun and Profit for More Than Fifty Years"

Offline Dragonfly

  • CNC Jedi
  • *****
  • Posts: 2370
    • View Profile
Re: FORUM UNDER MAINTENANCE currently READ ONLY
« Reply #4 on: April 25, 2018, 18:10:38 pm »
I never realized until now how much I've become addicted to this forum :)
And, according to the universal law of misery, I had an urgent need for help and advice about some script I wanted to write, just when the forum went down.
As a last resort I asked David and he gave a helping hand.
Thank you, David, for your kind cooperation!

Offline EddyCurrent

  • CNC Jedi
  • *****
  • Posts: 4463
    • View Profile
Re: FORUM UNDER MAINTENANCE currently READ ONLY
« Reply #5 on: April 25, 2018, 19:56:39 pm »
.
Made in England

Offline Bob La Londe

  • CNC Jedi
  • *****
  • Posts: 3975
  • ^ 8.5 pounds on my own hand poured bait.
    • View Profile
    • CNC Molds N Stuff
Re: FORUM UNDER MAINTENANCE currently READ ONLY
« Reply #6 on: April 25, 2018, 23:29:10 pm »
I am so happy to see it back up and running.  NICE graphic Eddy. 
Getting started on CNC?  In or passing through my area?
If I have the time I'll be glad to show you a little in my shop. 

Some Stuff I Make with CamBam
http://www.CNCMOLDS.com

Offline pixelmaker

  • CNC Jedi
  • *****
  • Posts: 1777
    • View Profile
    • pixelmaker
Re: FORUM UNDER MAINTENANCE currently READ ONLY
« Reply #7 on: April 26, 2018, 08:04:10 am »
Thanks for fixing the forum so quickly.

ralf

Offline 10bulls

  • Administrator
  • CNC Jedi
  • *****
  • Posts: 2164
  • Coding Jedi
    • View Profile
    • www.cambam.info
Re: FORUM UNDER MAINTENANCE currently READ ONLY
« Reply #8 on: April 26, 2018, 08:37:02 am »
NICE graphic Eddy. 
+1 ... Love it!

I'm off to buy some mug inkjet transfer paper right now.  ;D

Thanks everyone!


Offline dh42

  • Administrator
  • CNC Jedi
  • *****
  • Posts: 6133
    • View Profile
    • Cambam V1.0 French Doc
Re: FORUM UNDER MAINTENANCE currently READ ONLY
« Reply #9 on: June 08, 2018, 18:18:29 pm »
Hello,

Just to warn you that my internet is broken since yesterday (box out of order, because storm) ,I will not be able to connect to the web until next Wednesday (I think). So, sorry, I will not be able to delete spams on the forum if there is ..

++
David
« Last Edit: June 08, 2018, 18:26:25 pm by dh42 »

Offline lloydsp

  • CNC Jedi
  • *****
  • Posts: 8331
    • View Profile
Re: FORUM UNDER MAINTENANCE currently READ ONLY
« Reply #10 on: July 19, 2018, 20:21:12 pm »
FWIW, Andy, the forum is now 'prodigiously slow', even compared to how it was a couple of weeks ago.  It got immensely-faster for a short time (a day or two).  Now, it's slower (for me) than it was prior to your most-recent changes.

I don't know, anymore, about maintaining web sites, because I haven't done one since 1997.  So I have no idea what you're doing or what you're going through.  But I thought you'd want the feedback.

Lloyd
"Pyro for Fun and Profit for More Than Fifty Years"

Offline Bubba

  • CNC Jedi
  • *****
  • Posts: 2984
    • View Profile
Re: FORUM UNDER MAINTENANCE currently READ ONLY
« Reply #11 on: July 19, 2018, 20:25:42 pm »
In my neck of the woods I don't see any difference before and now when accessing/browsing the website.. 8)
My 2ยข

Win 10 64 bit, CB [1.0} rc 1 64 bit, Mach3, ESS, G540

Offline 10bulls

  • Administrator
  • CNC Jedi
  • *****
  • Posts: 2164
  • Coding Jedi
    • View Profile
    • www.cambam.info
Re: FORUM UNDER MAINTENANCE currently READ ONLY
« Reply #12 on: July 19, 2018, 21:09:55 pm »
FWIW, Andy, the forum is now 'prodigiously slow', even compared to how it was a couple of weeks ago.  It got immensely-faster for a short time (a day or two).  Now, it's slower (for me) than it was prior to your most-recent changes.
Thanks Lloyd.
I haven't been working on the server much last day or two.  The recent web changes *should* be separate from the forum code (which hasn't changed).  ???
Are you using IE to browse the site?  I don't have any problems with Chrome, but I have noticed some odd delays when using Edge.  When it is quiet, I will reboot the server - it has been up for a number of weeks now so may just need a bit of a kick.
 

Offline lloydsp

  • CNC Jedi
  • *****
  • Posts: 8331
    • View Profile
Re: FORUM UNDER MAINTENANCE currently READ ONLY
« Reply #13 on: July 19, 2018, 21:13:46 pm »
Andy, I'm using Chrome, but under XP.  That might be an issue.

Lloyd
"Pyro for Fun and Profit for More Than Fifty Years"

Offline Bob La Londe

  • CNC Jedi
  • *****
  • Posts: 3975
  • ^ 8.5 pounds on my own hand poured bait.
    • View Profile
    • CNC Molds N Stuff
Re: FORUM UNDER MAINTENANCE currently READ ONLY
« Reply #14 on: July 19, 2018, 22:25:08 pm »
Yeah, Chrome dropped updates and security support for XP users a while back. 
Getting started on CNC?  In or passing through my area?
If I have the time I'll be glad to show you a little in my shop. 

Some Stuff I Make with CamBam
http://www.CNCMOLDS.com