Author Topic: Anilam 3300mk post to conversational  (Read 1347 times)

Offline oleancom

  • Ewok
  • *
  • Posts: 3
  • too many hobbies - too little time!
    • View Profile
    • OleanComputers.com
Anilam 3300mk post to conversational
« on: March 04, 2019, 12:13:41 pm »
This is a post I've made for the Anilam 3300mk CamBam to conversational.  Seems to work well.

I bought a used Fryer MB-11 mill from Ebay and ran this on the Offline software.

Thanks for the past help lloydsp.

RobJ
'cutcoeng'
Rob Jackson

CNC, ABB technician by day.
Custom computer build/repair by night.

Offline lloydsp

  • CNC Jedi
  • *****
  • Posts: 8331
    • View Profile
Re: Anilam 3300mk post to conversational
« Reply #1 on: March 04, 2019, 13:29:02 pm »
Nice, Rob.
You've turned a couple of 'tricks' in that post that hadn't occurred to me.  Yet, I see how they should work, just from looking at your .cbpp file.

Neat job!
Lloyd
"Pyro for Fun and Profit for More Than Fifty Years"

Offline oleancom

  • Ewok
  • *
  • Posts: 3
  • too many hobbies - too little time!
    • View Profile
    • OleanComputers.com
Re: Anilam 3300mk post to conversational
« Reply #2 on: March 04, 2019, 15:14:09 pm »
You're probably mentioning the way I passed the Drilling cycle text in while maintaining the G81, G82, etc...

I thought I'd share this.  I'd think there must be a lot of Anilam 3300 users out there that think they can't use cam.  Well you can.  Once created this can be edited in the Anilam itself.  Should be useful!

Thanks Lloyd!

RobJ
Rob Jackson

CNC, ABB technician by day.
Custom computer build/repair by night.

Offline tlmkr38

  • Ewok
  • *
  • Posts: 7
    • View Profile
Re: Anilam 3300mk post to conversational
« Reply #3 on: August 05, 2020, 18:48:07 pm »
Thanks! I've needed that!!