Author Topic: Need help  (Read 1552 times)

Offline tangokilo

  • Ewok
  • *
  • Posts: 2
    • View Profile
Need help
« on: November 08, 2019, 14:57:26 pm »
Hello to all,

I want to change vom Mach3 to Beamicon2. Now I´m seaching a PP for this Controller.
Can anybody help?

Thanks a lot

Thomas

Offline lloydsp

  • CNC Jedi
  • *****
  • Posts: 8297
    • View Profile
Re: Need help
« Reply #1 on: November 08, 2019, 16:12:18 pm »
TK,
I'd not heard of that one before, so I looked it up.  I can find absolutely nothing on that Sorotec site that shows what the command set of that control is.

Do you have any documents showing what commands it will accept?

Lloyd
"Pyro for Fun and Profit for More Than Fifty Years"

Offline EddyCurrent

  • CNC Jedi
  • *****
  • Posts: 4390
    • View Profile
Made in England

Offline pixelmaker

  • CNC Jedi
  • *****
  • Posts: 1749
    • View Profile
    • pixelmaker
Re: Need help
« Reply #3 on: November 08, 2019, 18:44:12 pm »
beamicon 2 works with DIN/ISO G-Code. It must work with the "Default" PP.
There is a reference manual with the G and M commands.
I find it unfortunately only in German language.
If it is necessary I can call Roy Kloss or Nicolas Benezan if there is anything in English. 

ralfg

Offline tangokilo

  • Ewok
  • *
  • Posts: 2
    • View Profile
Re: Need help
« Reply #4 on: November 12, 2019, 09:23:38 am »
Thanks a lot for your help...
I think, there will be no problems anymore and I can switch to beamicon2  :)

Greetings
Thomas