Author Topic: CamBam 1.0 is now the official production release  (Read 1050 times)

Offline 10bulls

  • Administrator
  • CNC Jedi
  • *****
  • Posts: 2150
  • Coding Jedi
    • View Profile
    • www.cambam.info
CamBam 1.0 is now the official production release
« on: March 26, 2020, 12:10:10 pm »
Hello everyone.  I hope everyone is keeping safe and well!

CamBam 1.0 is now finally the official production release.

https://cambamcnc.com/downloads/

This is the same as the V1.0 rc3 release that has been under testing, with an additional bugfix for the resize dialog problem.

I will update the online version checker once we are confident there are no major issues with this release.

There is also a 64bit version of CamBam available under the development downloads...
https://cambamcnc.com/downloads/#devt

Note! If there are incompatibilities with existing plugins, these will need to be recompiled for x64 platforms.

The next development CamBam version V1.1 is also well under way and will be tackling problems and adding new features, which require more extensive work than could safely go into V1.0.
More info regarding that soon!

A huge thank you to everyone for testing, feedback and keeping the CamBam community such a creative and supportive place.

Regards

Andy

Offline EL34

  • CNC Jedi
  • *****
  • Posts: 763
    • View Profile
    • EL34's CNC Stuff
Re: CamBam 1.0 is now the official production release
« Reply #1 on: March 26, 2020, 12:13:23 pm »
Thanks Andy
Mach 3, Cambam, Autodesk Quickcad 8, machine info -> http://www.el34world.com/Misc/Cnc/CNC0.htm

Offline pixelmaker

  • CNC Jedi
  • *****
  • Posts: 1739
    • View Profile
    • pixelmaker
Re: CamBam 1.0 is now the official production release
« Reply #2 on: March 26, 2020, 12:25:37 pm »
thank you very much and stay healthy

ralf

Offline EddyCurrent

  • CNC Jedi
  • *****
  • Posts: 4248
    • View Profile
Re: CamBam 1.0 is now the official production release
« Reply #3 on: March 26, 2020, 12:49:48 pm »
Lovely, thank you.

Edit:

Of the plugins I have installed, these ones gave errors upon starting CamBam 64bit.

I will have a go at fixing VEngrave.


aligner.dll FIXED
Centroid.dll FIXED
EntityCounter.dll
ExportSelectionToDXF.dll
extender.dll
File Cleaner.dll
FileMerge.dll
geolink.dll
RadiusPlugin.dll
Randomize.dll
relocator.dll
Texturize.dll
trochomops.dll
VEngrave_Plugin.dll FIXED
ViewToolbarAddins.dll
« Last Edit: March 26, 2020, 19:34:30 pm by EddyCurrent »
Made in England

Offline 10bulls

  • Administrator
  • CNC Jedi
  • *****
  • Posts: 2150
  • Coding Jedi
    • View Profile
    • www.cambam.info
Re: CamBam 1.0 is now the official production release
« Reply #4 on: March 26, 2020, 12:57:26 pm »
You are all very welcome!    :D


Offline Bob La Londe

  • CNC Jedi
  • *****
  • Posts: 3896
  • ^ 8.5 pounds on my own hand poured bait.
    • View Profile
    • CNC Molds N Stuff
Re: CamBam 1.0 is now the official production release
« Reply #5 on: March 26, 2020, 16:51:17 pm »
Oh... DANG-IT!  I had not considered the incompatibility of many of the user written plug-ins to a 64bit version.  Some of the authors have not been active on the forum in a long time.   

Can we run the 32bit version and the 64bit version side by side?  

Getting started on CNC?  In or passing through my area?
If I have the time I'll be glad to show you a little in my shop. 

Some Stuff I Make with CamBam
http://www.CNCMOLDS.com

Offline EddyCurrent

  • CNC Jedi
  • *****
  • Posts: 4248
    • View Profile
Re: CamBam 1.0 is now the official production release
« Reply #6 on: March 26, 2020, 16:58:23 pm »
VEngave plugin now fixed for 64bit, attached to end of VEngrave thread. v1.2.0.2

David, please update the plugins page.

Bob, please post in this thread any plugins you find don't work, there may be a way for the ones you talk about.
« Last Edit: March 26, 2020, 17:07:50 pm by EddyCurrent »
Made in England

Offline dh42

  • Administrator
  • CNC Jedi
  • *****
  • Posts: 5866
    • View Profile
    • Cambam French Doc
Re: CamBam 1.0 is now the official production release
« Reply #7 on: March 26, 2020, 17:54:12 pm »
Hello

Quote
David, please update the plugins page.

Done !

@Andy, thanks for this new release  :)

++
David

Offline Bubba

  • CNC Jedi
  • *****
  • Posts: 2875
    • View Profile
Re: CamBam 1.0 is now the official production release
« Reply #8 on: March 26, 2020, 18:52:57 pm »
Thank you Andy!
My 2¢

Win 10 64 bit, CB [1.0} rc 1 64 bit, Mach3, ESS, G540

Offline Bubba

  • CNC Jedi
  • *****
  • Posts: 2875
    • View Profile
Re: CamBam 1.0 is now the official production release
« Reply #9 on: March 26, 2020, 19:27:55 pm »
Can we run the 32bit version and the 64bit version side by side?
*******************
Unfortunately no. After upgrading to 64 bit version only few files were left in old CB directory.
My 2¢

Win 10 64 bit, CB [1.0} rc 1 64 bit, Mach3, ESS, G540

Offline 10bulls

  • Administrator
  • CNC Jedi
  • *****
  • Posts: 2150
  • Coding Jedi
    • View Profile
    • www.cambam.info
Re: CamBam 1.0 is now the official production release
« Reply #10 on: March 26, 2020, 20:13:41 pm »
Can we run the 32bit version and the 64bit version side by side?  
The installer is designed to 'upgrade' earlier installations, but could be modified so both can be installed... I'll look into that.

A bit of a interim hack: you can install the 64 bit version, copy the program folder somewhere, then uninstall 64 bit and install the 32 bit version.  You can then run the 64 bit version by creating a shortcut to the 'copied' 64 bit version.

Offline dh42

  • Administrator
  • CNC Jedi
  • *****
  • Posts: 5866
    • View Profile
    • Cambam French Doc
Re: CamBam 1.0 is now the official production release
« Reply #11 on: March 26, 2020, 21:14:34 pm »
Hello

I also see that 0.98 is still usable .. nice ;)

++
David

Offline dh42

  • Administrator
  • CNC Jedi
  • *****
  • Posts: 5866
    • View Profile
    • Cambam French Doc
Re: CamBam 1.0 is now the official production release
« Reply #12 on: March 26, 2020, 21:31:43 pm »
Hello

Some check for plugin and 64 bits version

CutViewer V 1.2.5729.19324 - OK

VB plugins

Nummove V1.2.0.62 - OK
corner  V1.0.0.0 - OK
DimArrow V1.0.1.5 - OK
ExportSelectionToDXF V1.0.0.2 - OK (download the latest version for V1.0)
FeedConverter V1.0.0.0 - OK
Flatten V2.0.0.0 - OK
Grid Manager V1.0.2.0 - OK
HatchPlugin V1.2.1.0 - OK
InvertSelected V1.0.0.2 - OK
MakePartStock V2.0.5.1 - OK
NumLines V1.1.0.0 - OK
RadiusPlugin V0.5.0.0 - OK (download the latest version for V1.0)
SelectByObjectType V1.2.0.0 - OK
SelectUnused V1.0.0.4 - OK
Sized Lines V1.0.0.0 - OK
UnRoll V0.9.6.0 - OK
ArcsCenters V1.1.0.0 - OK
BoxAuto V1.0.0.10 - OK

++
David
« Last Edit: March 26, 2020, 22:57:53 pm by dh42 »

Offline dh42

  • Administrator
  • CNC Jedi
  • *****
  • Posts: 5866
    • View Profile
    • Cambam French Doc
Re: CamBam 1.0 is now the official production release
« Reply #13 on: March 26, 2020, 22:41:14 pm »
not working on 64 bits version

simulate with camotics 1.5.1.0
Collision detector
Script launcher V1.0 (for CB 1)

++
David
« Last Edit: March 26, 2020, 22:52:35 pm by dh42 »

Offline Bubba

  • CNC Jedi
  • *****
  • Posts: 2875
    • View Profile
Re: CamBam 1.0 is now the official production release
« Reply #14 on: March 27, 2020, 01:16:55 am »
Just want to say Thank You! To those who converting plugins to CB 64 bit.
My 2¢

Win 10 64 bit, CB [1.0} rc 1 64 bit, Mach3, ESS, G540