Author Topic: Licensing  (Read 679 times)

Offline Chip Owner

  • Ewok
  • *
  • Posts: 43
    • View Profile
Licensing
« on: April 12, 2020, 11:22:01 am »
Hi

I'm just investigating various cam products.  Returned for second look at CamBam (needs more videos). Looks very promising.

I do most of my CAD in home office, then take any drawings (paper) to our unit, which I can adjust and scribble on if required during fabrication, redraw later. 

When I switch to CNC, machine ordered henceforth known as 'Chip', I need to be able adjust both CAD, CAM & Gcode at the machine, as I can't be in two places at once, can the licence be used on two machines?  Albeit one at a time.

TIA

Offline dh42

  • Administrator
  • CNC Jedi
  • *****
  • Posts: 6383
    • View Profile
    • Cambam V1.0 French Doc
Re: Licensing
« Reply #1 on: April 12, 2020, 22:47:01 pm »
Hello

Welcome to the forum

https://cambamcnc.com/ref/ref.licenses

Quote
as I can't be in two places at once, can the licence be used on two machines?

Yes

Quote
For commercial use there should be one license per concurrent user.

++
David

Offline Chip Owner

  • Ewok
  • *
  • Posts: 43
    • View Profile
Re: Licensing
« Reply #2 on: April 13, 2020, 08:57:39 am »
Hi David

Many thanks for the reply. 

As a QCad user, CamBam makes a lot of sense immediately, where the few times I opened Fusion didn't!  It's what I've been looking for.

So now currently investigating if I have a spare (working) laptop I can use or another item to order, plenty of time with the lockdown, meanwhile I continue to ensure drawings we have are CNC friendly & learn CB!