Author Topic: inside / outside ignored - result is always inside ?!?  (Read 94 times)

Offline ThisAmplifierIsLoud

  • Storm Trooper
  • ***
  • Posts: 165
  • Jam it !
    • View Profile
inside / outside ignored - result is always inside ?!?
« on: November 19, 2020, 17:03:23 pm »
Dear CAMBAM - Jedis,

what´s wrong with that polyline ?
Wanted to mill it outside, but result is always inside.

Bug, feature or dummie in front of the screen ?

Best regards

Bernhard
best regards

Bernhard

Offline ThisAmplifierIsLoud

  • Storm Trooper
  • ***
  • Posts: 165
  • Jam it !
    • View Profile
Re: inside / outside ignored - result is always inside ?!?
« Reply #1 on: November 19, 2020, 17:07:50 pm »
The solution is ... dummie in front of the screen.
Found a duplicated line.

Best regards, keep on drinking !


Bernhard
best regards

Bernhard

Offline lloydsp

  • CNC Jedi
  • *****
  • Posts: 8360
    • View Profile
Re: inside / outside ignored - result is always inside ?!?
« Reply #2 on: November 19, 2020, 17:10:15 pm »
Good for you, Bernhard!

All the 'expert' help in the world may get you past a problem, but solving it yourself teaches you something you'll not easily forget!

Lloyd
"Pyro for Fun and Profit for More Than Fifty Years"

Offline tau

  • Storm Trooper
  • ***
  • Posts: 141
    • View Profile
Re: inside / outside ignored - result is always inside ?!?
« Reply #3 on: November 19, 2020, 17:13:25 pm »
Bernhard,

this seems to be another solution for your cambam file:

- select profile and explode
- then join all lines with 0.1 tolerance
- set polyline attribute Closed to "true"

and then it will also machine the outside.

Offline dh42

  • Administrator
  • CNC Jedi
  • *****
  • Posts: 6209
    • View Profile
    • Cambam V1.0 French Doc
Re: inside / outside ignored - result is always inside ?!?
« Reply #4 on: November 19, 2020, 17:14:45 pm »
Hello

Quote
Found a duplicated line.

For me, this is not the problem ; the problem is that your polyline(1) is not closed (see the Closed property) ... just set Closed to True and it will works ;)

But you're right, there is also a small duplicated line, but CamBam can do with it if you juste close the polyline.

++
David
« Last Edit: November 19, 2020, 17:17:11 pm by dh42 »