Author Topic: Collection of GRBL post processors  (Read 330 times)

Offline dh42

  • Administrator
  • CNC Jedi
  • *****
  • Posts: 6491
    • View Profile
    • Cambam V1.0 French Doc
Collection of GRBL post processors
« on: April 04, 2021, 23:10:43 pm »
Hello

Some post processors for GRBL

GRBL_noTC > no toolchange (M6) code in the Gcode

GRBL laser > for use with a laser ; start cut and end cut are used to stop/start the laser , M3/M5 are used, no toolchange

GRBL laser_noZ > the same, but Z movements are removed from the Gcode.

http://www.cambam.info/doc/dw/1.0.0/cam/post-processor.html#post-processor-management

The GRBL post processor that comes with the CamBam installation contain the toolchange (M6), so use it only if your "sender" software is able to manage toolchanges.

++
David
« Last Edit: April 04, 2021, 23:20:44 pm by dh42 »