Post Processor

[Wesco_98]

ho un centro di lavoro COMU con controllo FAGOR però nel CamBam completo non ho alcun post processor per il Fagor.
Esistono e si possono aggiungere i post processor mancanti?
grazie in anticipo per l'attenzione

[lloydsp]

For those who don't speak (what appears to be) Italian --

"I have a COMU work center with FAGOR control, but in the complete CamBam I don't have any post processor for the Fagor. Are there and can I add the missing post processors? Thanks in advance for your attention."

-------------
Wesco, I haven't yet found one, but with all the MANY Fagor controls out there, certainly there must be one!

'Wesco, non ne ho ancora trovato uno, ma con tutti i MOLTI controlli Fagor là fuori, di certo ce ne deve essere uno!'

L

[dh42]

Hello

Have a try with the PP in attachment ; it is the default camBam post pro with small changes, it is based on this document

http://www.fagorautomation.com/downloads/manuales/en/man_8055m_prg.pdf

http://www.fagorautomation.com/downloads/manuales/it/man_8055m_prg.pdf

I changed the code for inch/mm (G70 G71 instead G20 G21), constant velocity is assigned to G96 instead G64 and exact stop to nothing (can't find the pendant in FAGOR)

() comment replaced by ;

be careful, maybe it needs more adjustments ...

++
David